Engineered for superior corrosion resistance and conductivity, this M6x41mm brass hex head cap screw provides reliable fastening in demanding industrial settings. Its robust design ensures secure connections and longevity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 41mm |
| Head Width | 8mm |
Designed for demanding industrial environments, this M6x41mm brass hex head cap screw offers excellent corrosion resistance, making it ideal for applications exposed to moisture or corrosive chemicals. The inherent conductivity of brass also makes it suitable for electrical component assembly. With a nominal head width of 8mm and a precise M6 thread pitch, it ensures compatibility with standard metric tooling and mating components. The brass material provides good ductility and resistance to galling, facilitating secure installation and removal. Its 41mm length offers substantial grip for various assembly thicknesses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M6 tapped hole or nut for the 41mm length screw. 2. Hand-thread the screw to ensure proper alignment and prevent cross-threading. 3. Tighten the screw using a calibrated torque wrench to the recommended torque specification for M6 brass fasteners, typically 3-5 Nm, to avoid over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or deformation of the brass. | Employ a calibrated torque wrench and adhere to recommended torque values for brass fasteners. |
| Installing in environments with extreme galvanic corrosion potential without considering dissimilar metals. | Assess the galvanic compatibility of brass with other metals in the assembly, particularly in marine or highly saline environments. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Electrical and electronic assemblies requiring conductive fasteners, Marine hardware and boat building due to excellent corrosion resistance, Plumbing and HVAC systems where non-sparking properties are beneficial.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||