Engineered for robust performance, this M6x39mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its durable nylon construction ensures reliable fastening in challenging environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 39mm |
| Head Width | 33mm |
Purpose-built for heavy-duty applications, this M6x39mm Nylon Hex Head Cap Screw boasts a substantial 33mm head width for enhanced torque distribution and secure seating. Fabricated from high-strength, non-conductive nylon, it exhibits superior resistance to a broad spectrum of chemicals, solvents, and environmental factors, preventing galvanic corrosion common with metallic fasteners. Its inherent dielectric properties make it indispensable in electrical enclosures, sensitive electronic assemblies, and environments where conductivity must be avoided. The M6 thread size and 39mm length provide versatile integration into a wide range of industrial equipment and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating hardware (nut or threaded hole) with an M6 thread. 2. Position the screw through the components to be joined, ensuring alignment. 3. Engage the hex head with a suitable wrench or driver, applying steady torque until secure. 4. Avoid over-tightening, which can strip threads or damage the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially stripping the nylon threads or cracking the screw head. | Apply firm but controlled torque. Refer to torque charts for nylon fasteners if available, or use a calibrated torque wrench to avoid over-stressing the material. |
| Exposing the nylon screw to temperatures significantly beyond its operational range, leading to deformation or loss of strength. | Verify the screw's operating temperature range before deployment in high-heat applications. Consult the manufacturer's specifications for thermal limits. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Lightweight structural assemblies in harsh environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||