Engineered for superior performance, this M6x36mm Aluminum 6061 hex head cap screw offers exceptional strength-to-weight ratio. Its corrosion resistance makes it ideal for demanding environments and critical assemblies.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 36mm |
| Head Width | 7mm |
Purpose-built for heavy-duty applications, this M6x36mm hex head cap screw is manufactured from premium Aluminum 6061, a precipitation-hardened alloy renowned for its excellent mechanical properties, including high tensile strength and good fatigue resistance. The M6 nominal diameter and 36mm length provide robust fastening capabilities, while the 7mm head width ensures compatibility with standard tooling for secure torque application. This material's inherent corrosion resistance makes it an optimal choice for environments where moisture or chemical exposure is a concern, such as marine, aerospace, and outdoor equipment manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the hex head cap screw into the assembled components. 3. Tighten the screw to the recommended torque specification using an appropriate hex wrench, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a torque wrench set too high, leading to stripped threads or fastener failure. | Always consult the material's recommended torque values and use a calibrated torque wrench for accurate tightening. |
| Failing to check for thread damage on either the screw or the mating component. | Visually inspect both the screw and the receiving threads for any signs of deformation or contamination before assembly. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and interior fittings, Marine equipment and boat building.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||