Experience unparalleled performance with this M6x15mm Hex Head Cap Screw, expertly crafted from corrosion-resistant Titanium Grade 5. Engineered for exceptional strength and durability in critical assemblies.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 15mm |
| Head Width | 19mm |
Manufactured under strict quality controls, this M6x15mm Hex Head Cap Screw utilizes Titanium Grade 5 (Ti-6Al-4V), renowned for its exceptional strength-to-weight ratio, biocompatibility, and outstanding resistance to corrosion in harsh environments. The M6 thread specification ensures compatibility with standard metric fastening systems, while the 15mm length provides precise joint engagement. The 19mm hex head width facilitates secure torque application with standard tooling, making it ideal for aerospace, medical implants, marine hardware, and high-performance automotive components where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the receiving hole to remove any debris or contaminants. 2. Apply a small amount of anti-seize compound (compatible with titanium) to the threads if intended for frequent disassembly or to prevent galling. 3. Engage the screw by hand, ensuring smooth thread engagement, and then tighten to the recommended torque specification using a calibrated torque wrench and a properly sized hex socket.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to thread stripping or component damage. | Always adhere to the specified torque values for your application. Use a calibrated torque wrench for accurate tensioning. |
| Using standard steel fasteners in corrosive environments, leading to premature failure. | Select Titanium Grade 5 for superior corrosion resistance in marine, chemical, or high-humidity applications. |
| Galling of titanium threads when engaged with other titanium components without lubrication. | Apply a compatible anti-seize compound specifically designed for titanium fasteners to prevent galling. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical device implants and instruments, High-performance automotive and motorcycle assemblies, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||