Engineered for demanding environments, these M6 x 94mm polycarbonate hex head cap screws offer superior corrosion resistance and lightweight construction. Ideal for applications requiring non-conductivity and strength.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M6 |
| Length | 94mm |
| Head Width | 26mm |
A high-performance industrial component, this M6 x 94mm hex head cap screw is precision-molded from robust polycarbonate. With a head width of 26mm, it provides ample surface area for tool engagement while maintaining a low profile. Polycarbonate offers exceptional impact strength, excellent chemical resistance, and inherent electrical insulation properties, making it suitable for corrosive or electrically sensitive environments. Its lightweight nature contributes to reduced assembly weight. The M6 thread ensures compatibility with standard metric fastening systems. Operating temperature range typically spans from -40°C to 120°C.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Tighten using an appropriate hex wrench or socket, applying torque according to application requirements, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or head deformation. | Utilize a torque wrench to adhere to specified torque values for polycarbonate fasteners. Do not exceed recommended limits. |
| Using in applications exceeding the material's temperature or chemical resistance limits. | Consult material data sheets to confirm suitability for the specific operating environment, temperature, and chemical exposure. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and control panels, Medical equipment assemblies, Corrosive chemical processing environments, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||