This M6 x 94mm hex head cap screw, crafted from premium 304 stainless steel, offers superior corrosion resistance and exceptional tensile strength for reliable fastening in critical applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M6 |
| Length | 94mm |
| Head Width | 9mm |
Trusted by engineers across multiple sectors, this M6 x 94mm hex head cap screw is manufactured from high-grade 304 stainless steel, renowned for its excellent corrosion resistance, including to chlorides and most organic acids. The material's inherent toughness and tensile strength ensure robust joint integrity under significant mechanical stress. With a precise M6 thread diameter and a 94mm nominal length, combined with a 9mm head width for secure tool engagement, these fasteners are engineered for dependable performance in environments ranging from marine and food processing to general industrial assembly and chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw to confirm alignment and prevent cross-threading. 3. Tighten to the recommended torque specification using an appropriate hex driver, ensuring consistent pressure is applied.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or fastener breakage. | Always consult torque charts for the specific application and use a calibrated torque wrench. |
| Improper tool selection, resulting in cam-out and damage to the fastener head. | Utilize a properly sized hex bit or wrench that fits snugly into the head recess. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and equipment, Food processing machinery, Chemical processing equipment, Outdoor structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||