This M6 x 88mm hex head cap screw, crafted from robust polycarbonate, offers exceptional strength and chemical resistance. Its lightweight design and non-conductive properties make it ideal for specialized industrial applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M6 |
| Length | 88mm |
| Head Width | 14mm |
Precision-manufactured to tight tolerances, this M6 x 88mm polycarbonate hex head cap screw features a 14mm head width for secure engagement. Polycarbonate's inherent properties provide excellent impact strength, good electrical insulation, and resistance to a wide range of chemicals and UV exposure. This makes it a superior choice for applications where metal fasteners may corrode, conduct electricity, or add excessive weight. Its dimensional stability ensures reliable performance in varying environmental conditions, suitable for both indoor and outdoor use.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M6 threaded hole or nut. 2. Insert the M6 x 88mm polycarbonate hex head cap screw into the assembly. 3. Tighten the screw using a 14mm hex wrench or socket until snug, avoiding over-tightening to prevent material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to cracking or stripping. | Apply only the necessary torque to secure the assembly, using a torque wrench if precise control is required. |
| Using the screw in applications exceeding its recommended temperature or chemical resistance limits. | Consult the polycarbonate material datasheet for specific operating parameters and ensure suitability for the intended environment. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment, Marine and corrosive environments, Medical devices and equipment, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||