Engineered for superior performance, this M6 x 74mm hex cap screw is constructed from premium 304 stainless steel. It offers exceptional corrosion resistance and robust mechanical properties for secure and durable fastening in diverse applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 74mm |
| Head Width | 13mm |
Manufactured under strict quality controls, this M6 x 74mm hex head cap screw features a nominal diameter of M6 and a length of 74mm. The head width measures 13mm, providing ample surface area for torque application. Fabricated from 304 stainless steel, this fastener exhibits excellent resistance to rust, corrosion, and a wide range of chemical agents, making it ideal for marine, outdoor, and food processing environments. Its inherent strength and ductility ensure reliable performance under moderate stress and temperature fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 13mm hex head. 2. Thread the screw into the pre-tapped hole or mating component, ensuring smooth engagement of threads. 3. Apply consistent torque, avoiding over-tightening, to achieve a secure and stable joint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a wrench that is too large or too small for the hex head, leading to cam-out and potential stripping. | Always use a correctly sized wrench or socket that fits snugly onto the hex head to ensure optimal grip and torque transfer. |
| Applying excessive torque, which can strip threads or deform the screw head, compromising the joint's integrity. | Tighten the screw until snug and then apply additional torque incrementally, referencing torque specifications for the application if available. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and fixtures, Outdoor equipment and enclosures, Food processing machinery, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||