Engineered for demanding industrial environments, this M6 x 66mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties, making it a reliable fastening solution where metal alternatives fail.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M6 |
| Length | 66mm |
| Head Width | 8mm |
A proven choice for industrial professionals, this M6 x 66mm Nylon Hex Head Cap Screw is constructed from high-grade nylon, offering superior resistance to chemicals, moisture, and UV degradation. Its lightweight nature reduces overall assembly weight without compromising tensile strength for its intended applications. The 8mm head width ensures compatibility with standard tooling for secure installation. This fastener is ideal for environments where electrical conductivity is a concern or in corrosive atmospheres such as chemical plants, marine applications, and outdoor equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating hole and thread. 2. Hand-tighten the screw to engage threads. 3. Use a standard wrench or nut driver to tighten to the required torque, avoiding overtightening. 4. Verify secure fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nylon fasteners, which can strip threads or compromise material integrity. | Tighten nylon screws to a snug fit, using a torque wrench if precise load is required, and avoid excessive force. |
| Using nylon screws in high-temperature applications where material softening may occur. | Consult material specifications for maximum operating temperature and select a suitable alternative if the environment exceeds nylon's capabilities. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical Processing Equipment, Electrical Enclosures and Assemblies, Marine and Coastal Hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||