This M6 x 59mm Nylon Hex Head Cap Screw provides a robust, corrosion-resistant fastening solution for diverse industrial applications where metal fasteners are unsuitable.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 59mm |
| Head Width | 13mm |
Designed for demanding industrial environments, this M6 x 59mm hex head cap screw is constructed from high-performance nylon, offering excellent chemical resistance, electrical insulation, and a lightweight profile. Its M6 thread size ensures compatibility with standard metric components, and the 59mm length provides ample grip for secure fastening. The 13mm head width allows for easy engagement with standard hex tools, while the material's inherent non-magnetic properties make it ideal for sensitive electronic or medical equipment. This fastener is engineered to withstand moderate loads and is particularly suited for applications where galvanic corrosion is a concern or where non-conductive properties are essential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw into the component until snug. 3. Use an appropriate hex wrench to tighten the screw to the desired torque, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or crack the head. | Tighten the screw to a snug fit, then apply only moderate additional torque using a hex wrench. Refer to material specifications for recommended torque values if available. |
| Using the screw in applications exceeding its load-bearing capacity or temperature range. | Consult the material's technical data sheet to ensure the screw is suitable for the intended load, temperature, and chemical environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment and devices, Corrosive chemical processing environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||