This M6 x 39mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance, lightweight construction, and excellent electrical insulating properties, making it a superior choice for demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M6 |
| Length | 39mm |
| Head Width | 12mm |
Trusted by engineers across multiple sectors, this M6 x 39mm Nylon Hex Head Cap Screw (12mm head width) provides a non-conductive and chemically inert fastening solution. Manufactured from high-performance nylon, it exhibits excellent tensile strength for its weight, superior resistance to common acids, alkalis, and solvents, and a wide operating temperature range. Its inherent dielectric properties make it ideal for electrical assemblies where conductivity must be avoided. The robust hex head design ensures secure torque application for reliable assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M6 tool for the hex head. 2. Insert the cap screw through the assembled components. 3. Tighten the cap screw to the required torque, ensuring a secure fit without over-stressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to material deformation or stripping. | Use a torque wrench and adhere to recommended torque specifications for nylon fasteners to prevent damage. |
| Using in applications exceeding the material's temperature or load-bearing limits. | Consult the material datasheet for operating temperature ranges and tensile strength to ensure suitability for the application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Marine and offshore assemblies, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||