Reliable M6 x 35mm brass hex head cap screws, featuring a 25mm head width for superior torque application. Engineered for durability and corrosion resistance in diverse industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M6 |
| Length | 35mm |
| Head Width | 25mm |
Manufactured under strict quality controls, this M6 x 35mm hex head cap screw is crafted from premium brass, offering excellent corrosion resistance, non-magnetic properties, and good electrical conductivity. The substantial 25mm head width ensures optimal engagement with standard hex wrenches or sockets, facilitating secure and efficient assembly. Ideal for applications where galvanic corrosion is a concern or where non-sparking properties are beneficial. Meets industrial standards for thread pitch and tolerances, guaranteeing consistent performance and interchangeability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw to confirm alignment and prevent cross-threading. 3. Tighten using an appropriate hex wrench or socket, applying torque according to design specifications, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or fastener breakage. | Adhere to recommended torque specifications for the application. Consult engineering drawings or material data sheets. |
| Failing to properly clean mating threads before installation. | Inspect and clean both the screw and the receiving threads to remove any contaminants that could impede proper engagement or cause damage. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical enclosures and components, Instrumentation and control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||