Engineered from aerospace-grade Titanium Grade 5, this M6 x 34mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M6 |
| Length | 34mm |
| Head Width | 16mm |
Manufactured under strict quality controls, this M6 x 34mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent biocompatibility, high tensile strength (up to 950 MPa), and impressive fatigue life. The material's inherent resistance to saltwater, chemicals, and extreme temperatures makes it ideal for applications where reliability is paramount. The 16mm head width ensures sufficient surface area for torque application, while the metric M6 thread provides robust fastening capabilities. Each fastener undergoes rigorous dimensional and material property verification to meet stringent industry standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces and threads of both the screw and the receiving component to remove any debris or contaminants. 2. Apply a suitable threadlocker or anti-seize compound as recommended for the specific application and materials. 3. Insert the hex head cap screw and thread it in by hand to ensure proper engagement and prevent cross-threading. Tighten to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force without a torque wrench, potentially stripping threads or overstressing the fastener. | Always use a calibrated torque wrench to tighten the screw to the manufacturer's recommended torque specification for the application. |
| Failing to clean mating surfaces, leading to poor seating and inconsistent clamping force. | Thoroughly clean all mating surfaces and threads before installation to ensure proper contact and secure fastening. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components and interior fittings, Marine hardware and corrosion-critical assemblies, Medical implants and surgical instrumentation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||