Engineered for reliability, this M6 x 30mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and electrical insulation. Ideal for environments where corrosion and conductivity are concerns.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M6 |
| Length | 30mm |
| Head Width | 32mm |
Trusted by engineers across multiple sectors, this M6 x 30mm Nylon Hex Head Cap Screw boasts a substantial 32mm head width for effective load distribution. Constructed from high-grade Nylon, it provides superior resistance to many chemicals, solvents, and corrosive agents, making it a robust choice for demanding industrial and electronic applications. Its non-conductive properties further enhance its utility in sensitive environments. The M6 thread and 30mm length ensure precise and secure fastening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool for the M6 hex head. 2. Align the screw with the pre-drilled or tapped hole. 3. Tighten the screw to the required torque, avoiding over-tightening to prevent material stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening Nylon screws, leading to thread stripping or head cracking. | Use a torque wrench set to the manufacturer's recommended torque for Nylon fasteners. Avoid excessive force. |
| Using Nylon screws in high-temperature environments exceeding Nylon's thermal limits. | Verify the operating temperature range of the Nylon material against the application's requirements. Consider alternative materials if temperatures are too high. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures, Chemical processing equipment, Medical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||