This M6 x 28mm nylon hex head cap screw offers superior corrosion resistance and dielectric properties. Its lightweight design makes it ideal for specialized industrial and electronic applications where metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M6 |
| Length | 28mm |
| Head Width | 8mm |
Engineered for reliability and performance, this M6 x 28mm hex head cap screw is manufactured from high-grade nylon, providing excellent chemical resistance and a non-conductive profile. The M6 thread ensures compatibility with standard metric components, while the 28mm length offers adequate engagement for most applications. With a head width of 8mm, it allows for standard tooling while maintaining a compact footprint. Its inherent toughness and resistance to moisture make it a robust choice for environments exposed to corrosive chemicals, electrical currents, or where weight reduction is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 8mm hex head. 2. Thread the M6 screw into the pre-tapped hole or nut until snug. 3. Tighten to the recommended torque for nylon fasteners, avoiding over-tightening to prevent thread stripping or head deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread damage or head cracking. | Use a torque wrench to adhere to the recommended torque specifications for nylon fasteners, typically lower than metal equivalents. |
| Using metal tools that can easily scratch or deform the nylon head. | Employ tools with soft jaws or ensure careful application of force to avoid damaging the hex head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment assembly, Chemical processing equipment, Lightweight structural components, Marine and outdoor applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||