Engineered from aerospace-grade Titanium Grade 5, this M6 x 26mm hex cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical assemblies.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M6 |
| Length | 26mm |
| Head Width | 18mm |
Precision-manufactured to tight tolerances, this Hex Head Cap Screw is constructed from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its excellent tensile strength, fatigue resistance, and biocompatibility. Featuring an M6 thread size and a nominal length of 26mm, it boasts a generous 18mm head width for optimal torque application and load distribution. The inherent properties of Titanium Grade 5, including its low density and remarkable resistance to saltwater and chemical corrosion, make this fastener ideal for environments where performance and longevity are paramount, such as aerospace structures, marine hardware, and high-performance automotive components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean threads of both the screw and the receiving component. 2. Apply a small amount of anti-seize lubricant if the application environment is particularly corrosive or if reassembly is anticipated. 3. Tighten the screw to the manufacturer's specified torque value using a calibrated torque wrench, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can lead to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Titanium Grade 5 fasteners. |
| Using incompatible lubricants or thread lockers that can react with titanium. | Consult fastener compatibility charts or the material supplier for appropriate lubricants and thread lockers for titanium alloys. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, High-performance automotive assemblies, Medical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||