Engineered for demanding environments, this M6 x 24mm polycarbonate hex head cap screw offers superior impact resistance and chemical inertness. Its exceptional strength-to-weight ratio makes it a preferred choice for lightweight yet robust assemblies.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 24mm |
| Head Width | 35mm |
Trusted by engineers across multiple sectors, this M6 x 24mm polycarbonate hex head cap screw features a generous 35mm head width for enhanced torque application and load distribution. Crafted from high-performance polycarbonate, it exhibits remarkable tensile strength, excellent electrical insulation properties, and exceptional resistance to a wide range of chemicals, UV radiation, and extreme temperatures. This makes it an ideal fastening solution for applications in the aerospace, automotive, medical device manufacturing, and electronics industries where reliability and non-conductivity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a pre-drilled and tapped hole or a nut. 2. Insert the hex head cap screw into the designated aperture. 3. Tighten the screw using a standard hex wrench or socket until secure, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, leading to thread stripping or head deformation. | Use a torque wrench set to the recommended torque specification for polycarbonate fasteners to ensure proper tension without damaging the material. |
| Using the screw in an application exceeding its temperature or chemical resistance limits. | Consult the polycarbonate material datasheet to verify compatibility with the specific environmental conditions and chemical exposures of your application. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electronics enclosures and components, Medical equipment assembly, Automotive interior and exterior trim, Marine hardware and fixtures, Aerospace sub-assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||