Engineered from high-strength Aluminum 6061, this M6 x 23mm hex head cap screw offers exceptional corrosion resistance and a lightweight profile, making it a superior choice for demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M6 |
| Length | 23mm |
| Head Width | 18mm |
Trusted by engineers across multiple sectors, this M6 x 23mm hex head cap screw is precision manufactured from Aluminum alloy 6061-T6. Exhibiting a tensile strength of approximately 310 MPa and a yield strength of 276 MPa, it provides robust fastening capabilities while maintaining a low density of 2.7 g/cm³. The nominal head width of 18mm ensures compatibility with standard M6 tooling. This alloy's excellent corrosion resistance makes it suitable for marine, aerospace, and outdoor applications where environmental exposure is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Insert the M6 x 23mm hex head cap screw into the designated hole. 3. Tighten using a suitable wrench or socket, applying torque within the recommended specifications for Aluminum 6061 fasteners to avoid stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, leading to thread stripping or fastener deformation. | Adhere to the manufacturer's recommended torque specifications, utilizing a torque wrench for accuracy. |
| Using in applications requiring significantly higher shear or tensile strength than Aluminum 6061 can provide. | Consult material strength charts and application load requirements to select an appropriate fastener material, such as steel alloys for critical structural components. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive interior and exterior fittings, Marine hardware and assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||