Engineered for superior strength and corrosion resistance, this M6 x 22mm hex head cap screw is crafted from premium 304 stainless steel. Its robust design ensures reliable fastening in challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M6 |
| Length | 22mm |
| Head Width | 26mm |
Manufactured under strict quality controls, this M6 x 22mm hex head cap screw boasts a substantial 26mm head width, providing ample leverage for secure installation. Constructed from high-grade 304 stainless steel, it offers exceptional resistance to rust and corrosion, making it ideal for applications exposed to moisture, chemicals, or saltwater. This material also provides excellent mechanical strength and durability, ensuring long-term performance in a wide range of industrial, marine, and construction settings. The precision threading guarantees a strong and stable connection with compatible nuts and tapped holes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Select the appropriate wrench or socket for the M6 hex head. 3. Thread the cap screw by hand for at least two full turns to prevent cross-threading. 4. Tighten the screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the screw during initial engagement. | Always start threading the cap screw by hand for several turns to ensure proper alignment and prevent cross-threading. |
| Over-tightening, leading to stripped threads or fastener failure. | Use a calibrated torque wrench and adhere to recommended torque values for M6 fasteners to avoid over-stressing the screw or the mating component. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and boat rigging, Outdoor structural assemblies, Chemical processing equipment, Food processing machinery, General industrial maintenance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||