This M6 x 19mm Hex Head Cap Screw is precision-engineered from premium 316 stainless steel, offering superior corrosion resistance and strength for critical fastening tasks.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M6 |
| Length | 19mm |
| Head Width | 22mm |
Built to exacting engineering tolerances, this M6 x 19mm hex head cap screw features a 22mm head width for optimal torque application. Manufactured from 316 stainless steel, it provides exceptional resistance to pitting, crevice corrosion, and general corrosion, even in harsh environments including saltwater and chemical exposure. The material's inherent durability and strength make it ideal for applications demanding long-term reliability and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench size (10mm or 3/8" recommended) for the hex head. 2. Ensure the mating threads are clean and free of debris. 3. Thread the cap screw into the receiving component, applying consistent torque to achieve secure fastening without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect torque, leading to fastener failure or thread stripping. | Refer to torque specifications for the specific application and material to ensure proper clamping force. |
| Cross-threading the screw, damaging both the screw and the receiving threads. | Carefully align the screw with the threads and initiate tightening by hand before using a wrench. |
A: This Hex Head Cap Screw, 316 Stainless Steel is manufactured from 316 Stainless Steel.
A: Marine hardware and vessel construction, Chemical processing equipment, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||