Engineered for lightweight strength and excellent chemical resistance, this M6 x 14mm polycarbonate hex head cap screw offers a robust fastening solution. Its non-conductive properties and high impact resistance make it ideal for sensitive environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M6 |
| Length | 14mm |
| Head Width | 26mm |
Trusted by engineers across multiple sectors, this M6 x 14mm hex head cap screw is manufactured from high-performance polycarbonate, offering superior impact strength, excellent dielectric properties, and broad chemical resistance. The M6 thread pitch ensures secure fastening, while the 14mm length provides adequate engagement for various assembly needs. The substantial 26mm head width distributes load effectively, minimizing stress on mating materials. This screw is an excellent choice for applications requiring non-metallic, corrosion-proof, and electrically insulating fasteners, commonly found in electronic enclosures, medical equipment, and marine environments where traditional metal fasteners may degrade or interfere.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw to start, ensuring proper alignment to prevent cross-threading. 3. Tighten the screw using an appropriate hex driver or wrench, applying consistent torque until snug. Avoid over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw. | Use a torque wrench to apply the recommended torque for polycarbonate to prevent stripping or cracking. |
| Using in high-temperature applications exceeding polycarbonate's continuous service temperature. | Verify the application temperature is within the specified continuous service temperature range for polycarbonate fasteners. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electronic Enclosures, Medical Equipment Assembly, Marine Hardware, Food Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||