This M6 x 14mm Nylon Hex Head Cap Screw provides a lightweight, non-conductive fastening solution. Engineered for corrosive environments and applications requiring electrical isolation.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M6 |
| Length | 14mm |
| Head Width | 19mm |
Designed for demanding industrial environments, this M6 x 14mm Hex Head Cap Screw is manufactured from high-performance nylon, offering superior resistance to chemicals, moisture, and corrosion. The M6 thread size ensures compatibility with standard metric systems, while the 14mm length provides adequate engagement for various assembly needs. With a head width of 19mm, it allows for sufficient torque application with standard tooling. Its non-conductive properties make it ideal for electrical enclosures, control panels, and any application where preventing short circuits or galvanic corrosion is critical. The inherent toughness of nylon also provides vibration resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M6 tapped hole or nut for the 14mm screw length. 2. Insert the Hex Head Cap Screw into the designated fastening point. 3. Tighten securely using a wrench or socket, ensuring not to overtighten to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to stripping or cracking of the threads or head. | Apply appropriate torque, typically less than for metal fasteners, and use hand tools or torque-limiting drivers. |
| Using in applications with excessive heat or significant mechanical stress beyond nylon's capabilities. | Verify the operating temperature and load requirements against the material's datasheet to ensure suitability. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Marine and outdoor applications, Lightweight assemblies requiring non-conductivity.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||