This M6 x 146mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation for demanding industrial environments. Its robust nylon construction ensures reliable fastening.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M6 |
| Length | 146mm |
| Head Width | 35mm |
Manufactured under strict quality controls, this M6 x 146mm hex head cap screw is precision-molded from high-grade Nylon 6/6. The material provides excellent tensile strength, impact resistance, and a wide operating temperature range, making it suitable for corrosive or electrically sensitive applications. The M6 thread ensures compatibility with standard metric fasteners, while the generous 35mm head width offers increased surface bearing area, distributing load effectively and preventing material damage. This non-conductive fastener is ideal for applications where galvanic corrosion or electrical conductivity is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Thread the M6 Nylon Hex Head Cap Screw into the receiving component by hand to prevent cross-threading. 3. Tighten the screw using an appropriate size hex wrench until snug. Avoid over-tightening to prevent stripping or damaging the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw. | Use a torque wrench calibrated for nylon fasteners or tighten until snug, then apply an additional quarter turn. Avoid excessive force. |
| Using the wrong size hex wrench. | Always use the correct size hex wrench to ensure proper engagement and prevent stripping of the hex socket. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Marine and chemical processing equipment, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||