Engineered for superior performance, these M6 x 134mm polycarbonate hex head cap screws offer exceptional impact resistance and chemical inertness. Their lightweight yet robust design ensures reliable fastening in diverse environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M6 |
| Length | 134mm |
| Head Width | 29mm |
Trusted by engineers across multiple sectors, these M6 x 134mm polycarbonate hex head cap screws provide a robust, non-conductive fastening solution. Constructed from high-performance polycarbonate, they exhibit excellent tensile strength, UV resistance, and a broad operating temperature range, making them suitable for corrosive environments and applications requiring electrical insulation. The substantial 29mm head width ensures adequate load distribution and facilitates secure tightening with standard hex drivers. These fasteners are ideal for industries demanding both mechanical integrity and material inertness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the screw into the receiving hole until snug to prevent cross-threading. 3. Use a calibrated torque wrench with an appropriate hex bit to tighten the screw to the specified torque value, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw, which can lead to cracking or stripping of the threads. | Always use a torque wrench set to the recommended torque for polycarbonate fasteners and consult material datasheets for specific values. |
| Using excessive force or the wrong size hex driver, potentially damaging the screw head or the tool. | Employ the correct size hex driver and apply smooth, consistent torque. If resistance is encountered, inspect the threads for misalignment or damage. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Medical equipment assembly, Electronics enclosures and chassis, Corrosion-resistant industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||