Engineered from premium Titanium Grade 5, this M6 x 118mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M6 |
| Length | 118mm |
| Head Width | 13mm |
Designed for demanding industrial environments, this M6 x 118mm hex head cap screw is manufactured from aerospace-grade Titanium Grade 5 (Ti-6Al-4V), known for its remarkable strength, low density, and excellent biocompatibility. With a nominal diameter of M6 and a length of 118mm, it features a robust hex head with a 13mm width for secure torque application. This material composition provides outstanding resistance to chemical attack and high temperatures, making it suitable for corrosive environments and applications where weight reduction is paramount, such as in aerospace, marine, and medical device assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a small amount of anti-seize compound to the threads if recommended for the specific application. 3. Hand-thread the screw to verify alignment and avoid cross-threading. 4. Tighten the screw to the specified torque using an appropriate hex driver, ensuring even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the screw during initial engagement. | Always hand-thread the screw for the first few turns to confirm proper alignment before applying torque. |
| Over-tightening, which can strip the threads or damage the screw head. | Utilize a calibrated torque wrench and adhere to the recommended torque specifications for Titanium Grade 5 fasteners. |
| Using incompatible tools, leading to head damage. | Employ high-quality hex drivers that precisely match the 13mm head width to prevent cam-out and tool slippage. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, Medical implants and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||