Engineered for environments requiring non-conductive and corrosion-resistant fastening, this M6 x 117mm polycarbonate hex cap screw offers superior chemical resistance and high impact strength.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Size | M6 |
| Length | 117mm |
| Head Width | 21mm |
A proven choice for industrial professionals, this M6 x 117mm hex head cap screw is manufactured from high-performance polycarbonate, offering exceptional dielectric strength, excellent chemical resistance to a broad range of solvents and acids, and a lightweight yet robust construction. The M6 thread size ensures compatibility with standard M6 nuts and tapped holes, while the 117mm length provides ample reach for various assembly requirements. The 21mm head width allows for secure tightening with standard M6 hex tools, making it ideal for applications where non-magnetic properties and resistance to corrosion are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the M6 polycarbonate cap screw into the designated hole or nut until snug. 3. Use a standard M6 hex wrench to tighten the screw to the required torque, avoiding overtightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw, leading to thread damage or cracking of the head. | Apply torque gradually and consult material datasheets for recommended torque values for polycarbonate fasteners. |
| Using metallic tools that can scratch or damage the polycarbonate surface. | Utilize hand tools with protective coatings or plastic alternatives when possible to maintain surface integrity. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment assembly, Medical device manufacturing, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||