Engineered from aerospace-grade Titanium Grade 5, this M6 x 110mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance. Its robust design ensures reliable fastening in extreme conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 110mm |
| Head Width | 31mm |
Purpose-built for heavy-duty applications, this M6 x 110mm Hex Head Cap Screw is meticulously manufactured from Titanium Grade 5 (Ti-6Al-4V). This alloy provides a remarkable combination of high tensile strength (approximately 950 MPa), low density (4.5 g/cm³), and excellent resistance to corrosion in aggressive environments, including saltwater and chemical exposure. The substantial 31mm head width ensures maximum surface contact for secure torque application and load distribution, preventing fastener loosening under vibration or stress. Ideal for critical structural components in aerospace, marine, automotive, and chemical processing industries where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select an appropriate torque wrench calibrated to the specified torque value for Titanium Grade 5 fasteners. 2. Ensure threads on both the screw and mating component are clean and free of debris or damage. 3. Apply a small amount of anti-seize compound suitable for titanium to the threads to prevent galling and ensure smooth installation. 4. Thread the cap screw by hand initially to avoid cross-threading, then tighten to the specified torque using the torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, leading to thread stripping or potential component damage. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Titanium Grade 5 fasteners to prevent over-stressing the threads. |
| Failure to use anti-seize compound, which can cause galling (cold welding) of the titanium threads during installation. | Apply a small amount of aerospace-grade anti-seize compound specifically designed for titanium to ensure smooth thread engagement and prevent galling. |
| Using standard steel tools which can damage the titanium surface or lead to contamination. | Utilize tools made from materials that will not damage or contaminate titanium, such as stainless steel or specialized titanium tooling. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, High-performance automotive assemblies, Chemical processing equipment, Medical implants and devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||