Engineered from robust polycarbonate, this M6 x 103mm hex head cap screw offers exceptional strength and corrosion resistance. Its non-conductive properties make it ideal for electrical applications where safety is paramount.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M6 |
| Length | 103mm |
| Head Width | 13mm |
Manufactured under strict quality controls, this M6 x 103mm hex head cap screw features a precise M6 thread and a total length of 103mm. The head exhibits a nominal width of 13mm, ensuring compatibility with standard tooling. Composed of high-performance polycarbonate, it offers superior resistance to a wide range of chemicals and environmental factors, including moisture and UV radiation. This material choice also provides excellent electrical insulation, making it suitable for applications where conductivity is a concern. The inherent toughness of polycarbonate ensures reliable mechanical performance without the risk of galvanic corrosion often associated with metal fasteners.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating hole size and thread form for the M6 thread. 2. Insert the polycarbonate hex head cap screw into the assembled components, ensuring proper alignment. 3. Tighten the screw using a standard hex driver to the recommended torque for polycarbonate, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, leading to thread stripping or head deformation. | Use a torque wrench and adhere to the recommended torque specifications for polycarbonate fasteners. Hand-tightening followed by a slight turn is often sufficient. |
| Using metal washers directly against the polycarbonate head, causing stress concentration and potential cracking. | Employ plastic washers or broad-faced washers specifically designed for use with plastic components to distribute load evenly. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment assembly, Marine and coastal environments where corrosion is a concern, Food processing machinery and medical devices requiring chemical resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||