Engineered from aerospace-grade Titanium Grade 5, this M5x88mm hex cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M5 |
| Length | 88mm |
| Head Width | 11mm |
Precision-manufactured to tight tolerances, this M5x88mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its high strength, excellent fatigue resistance, and exceptional corrosion resistance in harsh environments. With a nominal diameter of M5 and a length of 88mm, it features a 11mm hex head width for secure torque application. This material composition makes it ideal for applications demanding lightweight, high-performance fastening solutions where traditional steel fasteners fall short, particularly in corrosive or high-stress conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound if required by the application environment. 3. Tighten the hex head cap screw to the specified torque using a calibrated torque wrench, engaging the hex head fully with the appropriate socket.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening beyond the specified torque limit. | Always use a calibrated torque wrench and adhere to the manufacturer's recommended torque values to prevent thread stripping or fastener failure. |
| Using the incorrect tool size, leading to head damage. | Utilize a correctly sized hex socket that fully engages the head to ensure proper torque transfer and prevent cam-out or rounding of the hex. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and offshore equipment, High-performance automotive assemblies, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||