Engineered for superior performance, this M5 x 41mm hex head cap screw is crafted from premium 304 stainless steel. Its robust construction ensures reliable fastening in corrosive and high-stress applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M5 |
| Length | 41mm |
| Head Width | 10mm |
Manufactured under strict quality controls, this M5 x 41mm hex head cap screw boasts a nominal diameter of 5mm and a length of 41mm, with a precise 10mm head width for optimal tool engagement. Constructed from AISI 304 stainless steel, it offers excellent corrosion resistance, superior tensile strength, and good ductility, making it suitable for a wide range of industrial, marine, chemical, and food processing environments where resistance to rust and pitting is paramount. The hexagonal head design facilitates high torque application and secure fastening. Compliant with relevant international standards for dimensional accuracy and material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate size wrench or socket to fit the 10mm hex head. 2. Align the screw with the pre-tapped hole or nut, ensuring threads engage smoothly. 3. Apply consistent torque to tighten the screw until it is snug, avoiding over-tightening which can strip threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to cam-out and damaged fastener head. | Always use a wrench or socket that precisely matches the 10mm head width. |
| Cross-threading the screw by forcing it into the mating part. | Start threading by hand to ensure proper alignment before applying torque. |
| Over-tightening, which can lead to thread stripping or fastener failure. | Tighten until snug and secure. For critical applications, use a torque wrench set to the recommended value. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine and offshore equipment, Chemical processing plants, Food and beverage machinery, Outdoor structural assemblies, Automotive and aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||