This M5x27mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its robust nylon construction ensures reliable fastening in demanding environments, ideal for specialized industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M5 |
| Length | 27mm |
| Head Width | 11mm |
Precision-manufactured to tight tolerances, this M5x27mm Hex Head Cap Screw features a nominal thread diameter of M5 and a nominal length of 27mm. The head boasts a substantial 11mm width for secure torque application. Constructed from high-grade nylon, it exhibits excellent chemical resistance, low friction, and non-conductive properties, making it suitable for applications where galvanic corrosion is a concern or in electrical assemblies. Its operating temperature range and tensile strength are critical considerations for load-bearing applications, ensuring performance stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M5 tapped hole or nut. 2. Hand-thread the screw into the receiving component to confirm alignment and prevent cross-threading. 3. Utilize a hex driver of the appropriate size (typically 8mm for an 11mm head width) to tighten the screw to the desired torque specification, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nylon screws | Apply torque incrementally and refer to material datasheets for recommended torque values to prevent stripping or deformation of the nylon threads. |
| Using in high-temperature or high-load applications without verification | Consult the nylon material's datasheet for specific temperature limits and tensile strength to ensure it meets the application's environmental and load requirements. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and components, Chemical processing equipment, Corrosion-prone environments, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||