This M5x132mm Hex Head Cap Screw, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening solutions.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M5 |
| Length | 132mm |
| Head Width | 15mm |
Precision-manufactured to tight tolerances, this M5x132mm Titanium Grade 5 hex head cap screw ensures reliable performance in extreme environments. Grade 5 titanium alloy (Ti-6Al-4V) provides a minimum tensile strength of 895 MPa and excellent fatigue resistance, making it ideal for applications requiring high strength without excessive weight. The M5 thread provides secure engagement, while the 132mm length offers substantial grip. The 15mm hex head width allows for secure torque application using standard tooling. This fastener is inert to most corrosive agents, including saltwater and various chemicals, ensuring longevity in marine, medical, and aerospace sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Apply appropriate thread locker if specified by the application design. 3. Tighten the M5x132mm cap screw to the recommended torque specification using a calibrated torque wrench to achieve optimal clamping force and prevent over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners in corrosive environments, leading to premature failure due to rust and degradation. | Select Titanium Grade 5 fasteners for their inherent corrosion resistance, especially in marine, chemical, or high-humidity applications. |
| Over-tightening of titanium fasteners, which can lead to galling or stripping of threads. | Always use a calibrated torque wrench and refer to established torque charts for Grade 5 titanium fasteners to avoid over-stressing the material. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||