Engineered for superior strength and corrosion resistance, this M5x124mm Hex Cap Screw is manufactured from aerospace-grade Titanium Grade 5. Ideal for critical applications requiring exceptional performance and longevity.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M5 |
| Length | 124mm |
| Head Width | 19mm |
Purpose-built for heavy-duty applications, this M5x124mm Hex Head Cap Screw boasts a formidable 19mm head width, ensuring robust torque transfer and secure fastening. Constructed from premium Titanium Grade 5 alloy, it delivers an exceptional strength-to-weight ratio, superior corrosion resistance against harsh environments, and excellent biocompatibility. Its high tensile strength and fatigue resistance make it indispensable in demanding sectors like aerospace, marine, medical implants, and high-performance automotive where reliability under extreme stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Thread the M5x124mm Grade 5 Titanium Hex Cap Screw into the designated receptacle by hand to avoid cross-threading. 3. Tighten to the recommended torque specification using an appropriate hex driver, verifying torque with a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the fastener during initial engagement. | Always start threading by hand to ensure proper alignment and prevent damage to the threads. |
| Over-tightening, leading to thread stripping or fastener failure. | Utilize a calibrated torque wrench and adhere to the manufacturer's specified torque values for Titanium Grade 5 fasteners. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, Medical device manufacturing, High-performance automotive assemblies, Corrosion-resistant industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||