This M5x115mm brass hex head cap screw offers superior corrosion resistance and excellent conductivity. Its robust design ensures secure and reliable fastening in a wide range of applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M5 |
| Length | 115mm |
| Head Width | 29mm |
Engineered for reliability and performance, this M5x115mm brass hex head cap screw features a substantial 29mm head width for optimal torque application and secure seating. Manufactured from premium brass, it exhibits excellent inherent corrosion resistance, making it suitable for humid, chemical, or marine environments. The material's non-sparking properties are advantageous in potentially explosive atmospheres. Thread pitch and tolerances conform to industry standards, ensuring compatibility with M5 tapped holes and nuts. Its high tensile strength, while not comparable to steel, is sufficient for numerous non-structural and decorative fastening requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M5 tapped hole or nut. 2. Insert the hex head cap screw and engage threads by hand to prevent cross-threading. 3. Tighten the screw using a suitable hex driver or wrench, applying consistent torque until snug. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading due to improper initial engagement. | Always start threading by hand for several turns to ensure proper alignment before using a tool. |
| Over-tightening, which can strip threads or deform the workpiece. | Tighten to a snug fit and avoid excessive force. Consult torque specifications if critical. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connections and enclosures, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||