Engineered for optimal performance, this M5 x 44mm Hex Head Cap Screw, fabricated from corrosion-resistant Aluminum 6061, offers a superior strength-to-weight ratio for critical assemblies.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M5 |
| Length | 44mm |
| Head Width | 31mm |
Specified by design engineers worldwide, this M5 x 44mm Hex Head Cap Screw exhibits a nominal thread diameter of 5mm and a shank length of 44mm. The hexagonal head presents a substantial 31mm width, providing ample surface area for torque application and load distribution. Constructed from Aluminum 6061, a precipitation-hardened alloy, it boasts excellent corrosion resistance and a favorable yield strength, making it ideal for aerospace, automotive, and marine environments where weight reduction and environmental resilience are paramount. Its precise dimensions ensure reliable engagement with mating components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 31mm hex head. 2. Align the M5 threads with the pre-tapped hole or nut. 3. Apply controlled torque to achieve the specified tension, avoiding over-tightening due to the material properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque that exceeds the yield strength of Aluminum 6061. | Consult engineering drawings for recommended torque values and utilize a calibrated torque wrench. |
| Cross-threading the M5 threads, leading to compromised joint integrity. | Carefully start the screw by hand to ensure proper thread engagement before applying any tool force. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive interior and exterior trim, Marine hardware and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||