Engineered from aerospace-grade Titanium Grade 5, these M5 x 41mm hex head cap screws offer superior strength-to-weight ratio and exceptional corrosion resistance. Ideal for critical applications demanding reliability.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M5 |
| Length | 41mm |
| Head Width | 29mm |
Built to exacting engineering tolerances, this M5 x 41mm Hex Head Cap Screw is forged from Titanium Grade 5 (Ti-6Al-4V). This alloy exhibits a tensile strength of approximately 950 MPa and a yield strength of 880 MPa, with a density of 4.43 g/cm³. The large 29mm head width provides substantial bearing surface, minimizing material deformation under load. Its inherent biocompatibility and resistance to saltwater and various chemicals make it suitable for marine, medical, and aerospace environments where weight reduction and extreme durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a small amount of anti-seize compound to the threads if required by the application environment. 3. Tighten the screw to the manufacturer's specified torque using an appropriate hex driver, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, leading to thread stripping or fastener failure. | Always adhere to the recommended torque specifications for the specific application and material being joined. |
| Using standard steel fasteners in corrosive environments, leading to premature failure. | Select fasteners made from materials like Titanium Grade 5 that are specifically designed to withstand the intended operating conditions. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive assemblies, Medical implants and surgical instruments, Marine hardware and equipment, Corrosion-resistant industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||