Engineered for robust performance, this M5 x 22mm brass hex head cap screw offers superior corrosion resistance and excellent conductivity. Its substantial 27mm head provides ample surface area for torque application and load distribution.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Size | M5 |
| Length | 22mm |
| Head Width | 27mm |
Trusted by engineers across multiple sectors, this M5 x 22mm brass hex head cap screw is meticulously manufactured to exacting standards. The inherent properties of brass, including its excellent corrosion resistance and non-sparking characteristics, make it ideal for marine, electrical, and chemical processing applications. The M5 thread size ensures compatibility with standard metric fastening systems, while the 22mm length provides adequate grip for joining components. The substantial 27mm hex head width facilitates secure tightening with standard tools, offering superior torque transfer and load bearing capabilities compared to smaller head designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 27mm hex head. 2. Align the screw with the pre-drilled or tapped hole. 3. Thread the screw by hand to ensure proper engagement and avoid cross-threading. 4. Tighten the screw to the required torque specification using a calibrated torque wrench, taking care not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force leading to thread stripping or fastener breakage. | Always use a calibrated torque wrench and adhere to recommended torque values for brass fasteners. |
| Cross-threading the screw during installation. | Begin threading by hand to confirm proper alignment and engagement before applying tool torque. |
| Using steel tools on brass fasteners, which can cause galling or damage. | Utilize appropriate brass or hardened steel tools that are compatible with brass to prevent surface damage. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Plumbing and HVAC systems, Corrosive chemical environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||