This M5 x 14mm nylon hex head cap screw offers superior corrosion resistance and lightweight strength. Engineered for demanding applications where metal fasteners fail, ensuring reliable performance in harsh conditions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M5 |
| Length | 14mm |
| Head Width | 12mm |
Manufactured under strict quality controls, this M5 x 14mm hex head cap screw features a nominal diameter of M5 and a length of 14mm. The head width measures 12mm, providing ample surface area for tool engagement. Constructed from high-performance nylon, it exhibits excellent tensile strength, chemical resistance to many solvents and acids, and a low coefficient of friction. Its dielectric properties make it suitable for electrical insulation. The material's inherent flexibility can also absorb minor vibrations. This fastener is designed for applications requiring a non-conductive, lightweight, and corrosion-proof joining solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select an appropriate wrench or socket for the 12mm hex head. 2. Carefully thread the M5 x 14mm nylon screw into the pre-drilled or tapped hole. 3. Tighten to the recommended torque specification for nylon fasteners, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw | Use a torque wrench set to the recommended specification for nylon fasteners to prevent damaging the threads or deforming the screw. |
| Using in extreme high-temperature applications | Verify the operating temperature range of the nylon material against the application's requirements, as nylon has limitations at elevated temperatures. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical and electronic equipment assembly, Marine and chemical processing environments, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||