Engineered for environments where corrosion and conductivity are concerns, this M5 x 132mm Nylon Hex Head Cap Screw provides secure, non-conductive fastening. Its robust nylon construction ensures durability.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M5 |
| Length | 132mm |
| Head Width | 13mm |
Designed for demanding industrial environments, this M5 x 132mm Hex Head Cap Screw is fabricated from high-performance Nylon, offering exceptional resistance to a wide range of chemicals, solvents, and corrosive agents. The material's inherent dielectric properties make it ideal for electrical applications where grounding or short circuits are a risk. With a precisely machined M5 thread and a 132mm length, it ensures reliable engagement in numerous assembly operations. The 13mm head width provides adequate torque application for secure fastening, while the lightweight nature of nylon reduces overall assembly weight. Suitable for use in moderate temperature ranges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threaded hole is clean and free of debris. 2. Insert the M5 Nylon Hex Head Cap Screw into the hole, ensuring proper thread engagement. 3. Tighten the screw using an appropriate wrench or socket on the 13mm hex head until snug. Avoid overtightening to prevent thread stripping or damage to the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread deformation or head stripping. | Apply firm, but not excessive, torque. Utilize a torque wrench if precise torque values are critical for the application. |
| Using the nylon screw in applications exceeding its temperature or chemical resistance limits. | Consult the material's chemical and temperature resistance charts to ensure compatibility with the specific operating environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical equipment assembly, Chemical processing equipment, Marine and corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||