Engineered for superior performance, this M5 x 130mm Hex Head Cap Screw features a robust Polycarbonate construction. Its advanced material offers excellent impact resistance and chemical inertness, making it ideal for specialized environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Size | M5 |
| Length | 130mm |
| Head Width | 31mm |
Specified by design engineers worldwide, this M5 x 130mm Hex Head Cap Screw offers a substantial M5 thread diameter and a generous 130mm length for deep material engagement. The impressive 31mm head width ensures excellent load distribution and provides ample surface area for tool grip. Manufactured from high-grade Polycarbonate, it exhibits exceptional dielectric strength, non-conductivity, and resistance to a wide range of chemicals and solvents. Its inherent toughness and UV stability make it a preferred choice for applications requiring both mechanical integrity and environmental resilience.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Insert the M5 Hex Head Cap Screw through the assembled components. 3. Tighten the screw using an appropriate hex drive tool, applying controlled torque to avoid over-stressing the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, which can lead to cracking or stripping of the polycarbonate threads. | Apply torque incrementally and stop when snug. Consult torque charts for similar fasteners if available, or use a torque wrench set to a low-to-moderate value. |
| Exposing the screw to solvents or chemicals known to degrade polycarbonate. | Verify chemical compatibility charts for Polycarbonate before use in chemically aggressive environments. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and insulation, Medical equipment assemblies, Corrosive environment installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||