Engineered for superior performance in corrosive and electrically sensitive environments, these M5 x 124mm Nylon Hex Head Cap Screws offer exceptional strength and chemical inertness, ensuring reliable fastening.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M5 |
| Length | 124mm |
| Head Width | 31mm |
Purpose-built for heavy-duty applications, this M5 x 124mm Nylon Hex Head Cap Screw features a substantial 31mm head width for optimal load distribution. Constructed from high-performance nylon, it exhibits excellent tensile strength, resistance to a broad spectrum of chemicals, and inherent dielectric properties, making it ideal for use in corrosive atmospheres, marine environments, and electrical assemblies where conductivity is a critical concern. Its lightweight nature also contributes to reduced overall assembly weight without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Insert the M5 x 124mm Nylon Hex Head Cap Screw into the pre-drilled hole. 3. Tighten the screw using an appropriate hex driver, applying consistent torque to achieve secure fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread stripping or material deformation. | Utilize a torque wrench and adhere to recommended torque specifications for nylon fasteners to prevent overstressing the material. |
| Using the wrong size hex driver, which can damage the screw head and compromise the torque applied. | Always select the correct size hex driver that precisely fits the hex head recess to ensure efficient engagement and prevent cam-out. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Marine and offshore structures, Electrical enclosures and control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||