Engineered for demanding environments, this M5 x 117mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and high tensile strength. Its robust design ensures reliable fastening in critical applications where standard metal fasteners fail.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M5 |
| Length | 117mm |
| Head Width | 36mm |
Specified by design engineers worldwide, this M5 x 117mm Hex Head Cap Screw is fabricated from high-performance Nylon. It boasts a substantial 36mm head width for superior load distribution and torque application. The material's inherent dielectric properties, excellent chemical resistance to solvents and oils, and a wide operating temperature range make it ideal for applications in electronics, chemical processing, and corrosive atmospheres. Its lightweight nature also contributes to reduced overall assembly weight without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M5 tool (e.g., socket wrench or hex key) that fits the 36mm head width. 2. Align the screw with the pre-drilled or tapped hole in the mating components. 3. Turn the screw clockwise until snug, ensuring even pressure distribution. 4. For critical applications, torque to manufacturer specifications for Nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the Nylon screw, which can lead to stripping or cracking the material. | Use a torque wrench set to the recommended torque for Nylon fasteners or tighten until snug and then back off slightly. |
| Using metal tools that are not properly sized, potentially damaging the hex head. | Always use a correctly sized and high-quality hex socket or wrench to ensure a proper fit and prevent cam-out. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Corrosion-resistant assemblies in chemical plants, Electrical insulation in electronic enclosures, Lightweight structural components in aerospace and automotive.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||