This M5 x 114mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric strength. Ideal for environments where metal fasteners are unsuitable due to chemical exposure or electrical conductivity concerns.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M5 |
| Length | 114mm |
| Head Width | 9mm |
Engineered for reliability and performance, this M5 x 114mm Nylon Hex Head Cap Screw features a nominal diameter of 5mm and a shank length of 114mm. The head measures 9mm across flats, providing ample grip for standard tooling. Constructed from high-grade Nylon, it exhibits excellent chemical resistance to many acids, alkalis, and solvents, along with inherent dielectric properties. Its lightweight nature and non-magnetic characteristics make it suitable for sensitive electronic assemblies and environments requiring non-sparking fasteners. The material's flexibility also offers a degree of vibration dampening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate tooling (e.g., socket wrench or nut driver) with a 9mm internal hex drive. 2. Insert the cap screw into the pre-drilled or tapped hole, ensuring it threads smoothly. 3. Apply consistent torque, avoiding over-tightening to prevent stripping or material deformation. Consult torque charts for specific Nylon materials if critical.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the Nylon screw, which can lead to stripping of the threads or cracking of the head. | Use a torque wrench and adhere to recommended torque values for Nylon fasteners to ensure secure fastening without damaging the screw. |
| Using metal tools that can damage the Nylon head or compromise its dielectric properties. | Utilize tools made from non-conductive materials or ensure they are clean and free of metal debris before engagement. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Chemical processing equipment, Marine and saltwater environments, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||