Engineered for superior performance, this M4x95mm Hex Head Cap Screw is crafted from aerospace-grade Titanium Grade 5. Offering exceptional strength-to-weight ratio and corrosion resistance, it ensures reliable fastening in critical environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M4 |
| Length | 95mm |
| Head Width | 16mm |
A high-performance industrial component, this M4x95mm Hex Head Cap Screw is manufactured from Titanium Grade 5 alloy, renowned for its exceptional tensile strength (up to 880 MPa), low density (approx. 4.5 g/cm³), and superior corrosion resistance in aggressive media. The M4 metric thread ensures compatibility with standard tapped holes, while the 95mm length provides ample grip for assemblies requiring extended reach. The 16mm hex head width facilitates secure tightening with standard tooling, delivering reliable joint integrity for applications demanding lightweight, high-strength solutions in aerospace, marine, and medical sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the screw to verify proper engagement and prevent cross-threading. 3. Tighten to the recommended torque specification using an appropriate calibrated torque wrench, ensuring even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M4 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M4 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can strip threads or compromise material integrity. | Always use a calibrated torque wrench and adhere to the manufacturer's recommended torque values for the specific application and mating materials. |
| Using incorrect tools that can damage the hex head or slip, leading to injury. | Utilize correctly sized, high-quality hex drivers or sockets for secure engagement and optimal torque transfer. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and equipment, Marine and offshore hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||