High-strength M24x92mm hex head cap screw crafted from Aluminum 6061. Offers excellent corrosion resistance and a superior strength-to-weight ratio for demanding applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M24 |
| Length | 92mm |
| Head Width | 22mm |
Trusted by engineers across multiple sectors, this M24x92mm hex head cap screw is manufactured from aerospace-grade Aluminum 6061. This alloy provides exceptional corrosion resistance, good formability, and excellent weldability, making it ideal for environments where weight reduction and durability are paramount. The 22mm head width ensures secure torque application. Its specific tensile strength and yield strength characteristics are critical for structural integrity in dynamic load applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubrication if specified for the application. 3. Tighten the screw to the recommended torque value using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material deformation. | Always consult the design specifications or a torque chart for the correct tightening torque for Aluminum 6061 fasteners. |
| Using the wrong tool size for the hex head, which can round off the head and make removal difficult. | Utilize a correctly sized hex socket or wrench to ensure a snug fit and proper torque transfer. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body assembly, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||