This M24x62mm Hex Head Cap Screw, manufactured from premium 316 stainless steel, offers superior corrosion resistance and strength for critical industrial applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M24 |
| Length | 62mm |
| Head Width | 26mm |
Designed for demanding industrial environments, this M24x62mm hex head cap screw is engineered from high-grade 316 stainless steel, renowned for its exceptional resistance to pitting, crevice corrosion, and general corrosion, particularly in saline and acidic conditions. With a nominal diameter of M24 and a length of 62mm, it provides robust fastening capabilities. The substantial 26mm head width ensures a wide bearing surface for secure torque application and load distribution, making it suitable for applications requiring high tensile strength and durability under extreme stress and environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure threads on both the screw and the mating component are clean and free of debris. 2. Apply appropriate lubricant or anti-seize compound if required for the specific application. 3. Thread the cap screw into the mating component by hand for at least two full turns to prevent cross-threading. 4. Tighten the cap screw to the manufacturer's specified torque using a calibrated torque wrench, ensuring the head width provides adequate leverage and bearing surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard carbon steel screw in a corrosive environment. | Always select fasteners made from materials like 316 stainless steel when exposure to moisture, chemicals, or salt is a factor. |
| Overtightening or undertightening the cap screw. | Utilize a calibrated torque wrench and consult engineering specifications or fastener torque charts for the correct tightening values to prevent component damage or joint failure. |
| Cross-threading the screw during installation. | Start threading the screw by hand for several turns to ensure proper alignment before using a tool. |
A: This Hex Head Cap Screw, 316 Stainless Steel is manufactured from 316 Stainless Steel.
A: Marine and offshore equipment, Chemical processing plants, Food and beverage manufacturing, Wastewater treatment facilities, Outdoor structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||