Engineered for robust fastening, this M24x54mm hex head cap screw is crafted from premium 304 stainless steel. Its superior corrosion resistance and tensile strength ensure reliable performance in challenging environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M24 |
| Length | 54mm |
| Head Width | 14mm |
Built to exacting engineering tolerances, this M24x54mm hex head cap screw features a 14mm head width for secure engagement with standard wrenches. Composed of 304 stainless steel, it offers excellent resistance to atmospheric, potable water, and a wide range of corrosive industrial media. The material's inherent durability and moderate strength make it ideal for applications requiring resistance to oxidation and significant mechanical stress, such as in marine hardware, food processing equipment, and chemical handling systems where hygiene and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 14mm hex head. 2. Ensure mating threads are clean and free of debris. 3. Thread the cap screw into the pre-tapped hole or nut until snug, then tighten to the required torque specification, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a tool that does not properly fit the 14mm hex head, leading to stripping. | Always use a correctly sized socket or wrench to prevent cam-out and damage to the fastener head. |
| Installing in a corrosive environment without verifying 304 stainless steel compatibility. | Confirm that 304 stainless steel is suitable for the specific chemical or environmental exposure to prevent premature corrosion. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine Hardware, Food and Beverage Processing Equipment, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||