Engineered for corrosive environments, this M24x25mm Nylon Hex Head Cap Screw provides reliable fastening. Its non-conductive properties and chemical resistance make it ideal for specialized assemblies.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M24 |
| Length | 25mm |
| Head Width | 31mm |
A high-performance industrial component, this M24x25mm Nylon Hex Head Cap Screw is constructed from robust Nylon 6/6, ensuring exceptional tensile strength and resistance to a broad spectrum of chemicals, including salts, alkalis, and most organic solvents. The M24 thread size and 25mm length provide secure engagement in a variety of substrates, while the 31mm head width allows for high torque application with standard tooling. Its inherent dielectric strength makes it a safe choice for electrical assemblies, and its lightweight nature contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the screw to start, verifying proper engagement. 3. Tighten to the recommended torque specification using an appropriate wrench, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread deformation or fracture. | Always adhere to torque specifications and use a torque wrench for precise application. |
| Using the screw in environments exceeding its chemical resistance temperature limits. | Consult the material's chemical resistance chart to ensure compatibility with the operating environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and control panels, Medical device assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||