This M24x24mm Hex Head Cap Screw is engineered from robust carbon steel for superior strength and durability. It offers a reliable fastening solution for demanding industrial and mechanical applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M24 |
| Length | 24mm |
| Head Width | 8mm |
Precision-manufactured to tight tolerances, this M24x24mm Hex Head Cap Screw features a nominal diameter of M24 and a functional length of 24mm. The head width is specified at 8mm, ensuring compatibility with standard M24 tooling. Constructed from high-grade carbon steel, this fastener exhibits excellent tensile strength and shear resistance, making it suitable for load-bearing joints and applications requiring high clamping force. Its unplated finish provides a base for further surface treatments or offers a cost-effective solution for environments without corrosive elements. The hex head design facilitates secure tightening with a wrench, minimizing the risk of slippage and ensuring consistent torque application.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Position the screw through the assembled components. 3. Tighten the screw using an appropriately sized hex wrench until the desired clamping force is achieved, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripped hex head. | Always use a wrench that precisely matches the 8mm head width of the M24 screw. |
| Over-tightening, causing thread damage or component deformation. | Apply torque gradually and consult engineering specifications for recommended torque values if available. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Machinery assembly, Structural framing, Equipment mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||