Engineered for extreme environments, this M24x15mm Hex Head Cap Screw utilizes aerospace-grade Titanium Grade 5 for superior strength, corrosion resistance, and minimal weight. Ideal for critical load-bearing applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M24 |
| Length | 15mm |
| Head Width | 9mm |
A high-performance industrial component, this M24x15mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), offering an exceptional combination of high tensile strength (950 MPa minimum) and low density (4.43 g/cm³). The M24 metric thread ensures robust engagement, with a nominal thread diameter of 24mm and a pitch of 3mm. The 15mm length provides controlled insertion depth, and the 9mm head width allows for secure torquing with standard tooling. Its inherent passivation layer provides excellent resistance to chloride, saltwater, and most industrial chemicals, making it suitable for corrosive or high-temperature environments where weight reduction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a small amount of anti-seize compound suitable for titanium fasteners. 3. Engage the cap screw by hand to prevent cross-threading. 4. Torque to manufacturer-specified values using a calibrated torque wrench, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tools which can gall or damage the titanium threads. | Utilize tools made from hardened steel or specialized non-galling materials. A dab of anti-seize compound is crucial. |
| Over-torquing the fastener, potentially leading to thread stripping or fastener failure. | Always consult the specific torque chart for Titanium Grade 5 fasteners of this size and thread pitch. Use a calibrated torque wrench. |
| Using incompatible lubricants or sealants that can react with titanium. | Employ only aerospace-grade anti-seize compounds or lubricants specifically rated for titanium alloys. Avoid molybdenum disulfide based lubricants. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and subsea equipment, High-performance automotive and motorsport, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||